Archive for 2019

Front shackle, back ring and hinge

I’ve added a pin & shackle system to the front of the collar as an adapter for normal-sized KDC padlocks. I also built a “reasonable” back hinge with a built-in leash ring.

I might go back to 4 rivets on each side, the two rivet setup is supposed to provide space for the hinge to operate, but it just looks sturdier with 4 rivets per side.

Realistically, that hinge should be completely welded into the main collar body rather than riveted on top, but I can’t ignore that it’s a nice accent element as it is right now.

 

(I also added a bushing to the locking hole for no damn reason)

Cell furnishing

The sink is unfinished, and also have a few design problems. I need to find some “ballpark” scaling for it.

I don’t know if that “combined” setup is realistic either (when it comes to pressure) but I like it, and it’s different from the typical prison ones.

More collar stuff.

Not much to say, I still haven’t decided on the hinge design.

Eevee makes metal surfaces look ridiculously fancy, it won’t look like that in the end, but it’s a nice visualisation still.

Scaling obsession

I’ve been sitting on this idea for a while now, It is based on an old photo of a resin statue and I thought that the “bulk” of that collar & cuff set what just perfect, not stupidly large, while still giving a feeling that it is designed purely for security over comfort: What you could expect from a fantasy-world slave trader.

That being said, I only have two angles to work from, it took me several attempts to get the proportions of the object itself right, and even more time to try to match it to a body (size wise).

You can see on the last mockup, (made with prims) I still shrunk it down just a little more. This is probably the biggest collar I’ve ever attempted to make and I’m not comfortable with it.

A lot of mockup ideas in the past few days…

Prison cell idea

I’ve been in a “3D sketching” mood lately, so why not?

This is very small (~2.8×2.8m), and not even “furnished”… I have some ideas for an even smaller one.

I like the “bottom” slit for the door, but I have to figure out a hatch design that works for it… maybe something that slides up and down with some kind of extension rod: guards shouldn’t have to bend over to open it.

A new gag idea

This may (or may not) be my next project, but I wanted to get the concept out of my system.

Rigid metal gags are not really “new” anymore, but I had this idea in the back of my mind of using flat stock rather than the typical round stock.

The idea is that only one end actually requires locking. The other side is essentially stuck in the slots as long as the “bit” is in the closed position.

A few thoughts:

  • It’s gonna be VERY adjustable with this design.
  • I do want it to animate open & closed.
  • I will “probably” make interchangeable “bits” (haven’t decided how yet)
  • It’s deceptively simple… is it TOO simple?
  • Structurally those slotted bars look like they would be easy to bend and snap.
  • I don’t like how the “ball” gag looks really (too simple again).

Right on time for Halloween!

I’m sorry for the lack of updates, but I wanted to make this a surprise release. After all, Halloween is the only seasonal event I actually try to participate in.

There took me about a week to make, the longest part was to come up with interesting designs: I did not want to just copy paste something I found online and call it a day. All of these are obviously inspired from existing art pieces, but they all have a personal twist.

As was last yeah, and the year before, this will only be available for a limited amount of time.

The Dullahan Collar & Pumpkin Jack Revosuit add ons are also available once again (for a limited time).

As usual, you can pick those from the KDC Main Store, or from the SecondLife Marketplace.

Happy Halloween everyone!

And a new set of tag plates!

I added a new set of tag plates focused around numbers. I’m sure someone will find a use for that.

You get both english and japanese numbers in this one, grouped in two separate plate sets.

Same features as the two original sets: Compatible with all TB products, Random mode, Public mode, Custom plates…

As usual, you can get them from the KDC Main Store, or from the SecondLife Marketplace.

Enjoy!

Random weekend thing

Yes it is dynamic, and yes, the math involved wasn’t fun at all. 😛

I should probably wait for a wider adoption of “Bake on Mesh” before I actually go further than the “prototype stage” with this.

The KDC Tag Plates are released!


Two collections of little wooden plates with a lot of naughty titles on them, for you to wear, (or be forced to wear ^_^)

They can be snapped on all TouchBound products that have at least one free lock point.
Each set comes with 17 markings to choose from, it also features a “random” mode for that little added “surprise”.
Adding your own plates is easy and a full-perm texture blank is included.

As usual, you can find them at the KDC Main Store, or on the SecondLife Marketplace.

Enjoy! ^_^

About Me
I started SecondLife in 2004 and created my own bdsm fetish virtual products under the name KDC. I fancy myself as a programmer, 3D artist and terrible game designer.
Archives
  • [—]2019
  • [+]2018
  • [+]2017
  • [+]2016
  • [+]2015
  • [+]2014
  • [+]2013
  • [+]2012
  • [+]2011
  • [+]2010
  • [+]2009
  • [+]2008
  • [+]2007
  • [+]2006